2
1
INTRODUCTION
BATTERY INSTALLATION
Ask an adult to help you install batteries by doing the following:
1. Leaving the neck portion of the swimsuit top tied, undo the outer Velcro™
fastener on the lower portion of the swimsuit and unwrap the ties. (See Fig. 1)
2. Undo the inner Velcro™ fastener. (See Fig. 1)
3. Using a Phillips screwdriver (not included), remove the two screws and the
battery compartment cover. (See Fig. 2)
4. Install two (2) AAA alkaline batteries making sure the (+) and (-) ends face the
proper direction as indicated inside the battery compartment. (See Fig. 3)
5. Replace the battery compartment cover and tighten the screws firmly to ensure
the compartment seal will be watertight.
6. Secure the inner Velcro™ fastener, rewrap the ties, and secure the outer
Velcro™ fastener. (See Fig. 4)
REPLACING BATTERIES:
• Dry the Little Mermaid thoroughly before the opening battery compartment.
• If moisture is present in the battery compartment, dry it with a towel.
• Install the new batteries as instructed above.
CONTENTS
a. 1 Swimming Little Mermaid Doll with Body Art
b. 1 Floating Seahorse Friend
c. 1 Waterproof Illustrated Storybook
Ages 3+
Item no.: 334965
a.
b.
c.
This beautiful princess was always one of the fairest in the land! However, well
before she set foot on the shore, she was a Princess under the sea. Now you can
take the Little Mermaid back to the water with the Storytime Collection™ Special
Edition Mermaid!
Adult Battery Installation Required
Illustrations may vary from actual contents.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
2 x AAA Batteries
1.5V AAA/LR03
1.5V AAA/LR03
