2
3
IMPORTANT INFORMATION
LOADING THE AIRBRUSH (Fig. 9)
Adult supervision recommended:
1. Remove the Airbrush from its holder and pull apart the two
ends.
2. Choose a Marker, remove the cap and set it aside.
3. Place the “drawing” end of the Marker into the front end of the
Airbrush. Firmly press the two ends of the Airbrush back
together until they click into place.
4. Place the Airbrush into its holder on the Base Unit.
QUICK START
• DO NOT USE MARKERS OTHER THAN THOSE INCLUDED WITH THIS PRODUCT as other
markers may be permanent and may not be removable.
• Use Markers included in this playset
only on items in this playset and not on other fabrics,
furniture, people, etc.
• DO NOT apply directly on skin.
• Recap markers after using and DO NOT leave markers in the sun or in very hot areas.
• Wash your hands and all accessories thoroughly after playing with markers.
• Never use the Airbrush to spray color on your face or other people‛s faces.
• Keep markers away from eyes. In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
• DO NOT use Stickers on humans, pets, furniture or any item which may be damaged by Sticker or
Sticker removal.
• Color must be allowed to dry between steps to prevent smearing and to prevent color from being
transferred to skin, other fabrics, furniture, etc.
• Remove Marker color by using a “Vinyl Drafting Eraser” (not included). DO NOT use cleaners,
abrasives, or other harsh chemicals. Some color may remain, especially if item has set overnight
before erasing.
Fig. 2a
Fig. 4
Fig. 6
Fig. 7
Fig. 3
Fig. 5
Fig. 2b
ASSEMBLY
7. Rest the Airbrush in its holder on the front edge of the Base Unit and place the Markers in the
storage openings provided. (Fig. 6)
NOTE: The floor of the Base Unit can remain flat (Fig. 7) or you can pull outward on the front leg of
the flat surface and it will become a slanted desk for airbrushing, drawing or homework! (Fig. 8)
Remove
Backing
Remove
Backing
Remove Pen Cap
Fig. 9
Fig. 10
Press
SIGN
BACK
NOTE: Color cannot be completely removed from the included T-shirts, boots or shoes.
Fig. 11
Fig. 8
4. Remove the backing from the Front “Open” Sign Sticker, place it on the Front of the “Open” Sign
and smooth it down. Repeat for the back of the “Open” Sign. (Fig. 3)
5. Snap each of the 4 removable shelves into place on the Wall. (Fig. 4)
6. Remove the backing from the “Billboard Sign” Sticker, place it on the Billboard Sign and smooth it
down. (Fig. 5) Then place the Billboard Sign atop the corner of the Wall Unit and snap it into place.
(Fig. 4)
An adult must assemble the unit. Here‛s how:
1. Cover a flat, level surface with cardboard or newspaper to prevent damage from airbrush overspray.
2. Place the Base Unit on the covered surface.
3. Open the Wall Unit to 90 degrees, place it at the corner of the Base Unit and snap it into place.
(Fig. 2a & 2b)
USING THE AIRBRUSH
1. Place a clean sheet of paper on the desk area of the Base Unit.
2. Remove the Airbrush from its holder, point the open end
downward toward the paper, then press and hold the button on
the top of the Airbrush. (Fig. 10)
3. Move the Airbrush around as a fine spray of color comes out
of the barrel and onto the paper. Release the button to stop
the spray.
FREE DESIGNING
Use the Markers by themselves to design your own color scene on
the floor of the Base Unit.
DESIGNING INCLUDED T-SHIRTS
1. Lay a blank T-Shirt included with the playset on top of
newspapers and place a Stencil Sheet over the shirt. (Fig. 11)
2. Color in the stencil openings with the Markers or make your own
designs without Stencils.
3. Make sure your designs are dry to the touch before stacking
them together.
STORING THE UNIT
When finished playing:
1. Release the airbrush button to conserve battery power.
2. Remove Marker from the Airbrush, recap it to prevent drying out, and place it in the storage area.
3. Store the entire unit in a cool, dry place away from direct sunlight.
