CAR
POOL
DANCE FLOOR
1
2
Attach the front seats by inserting the openings on the
sides of the front seats into the pegs on the walls of the car.
Attach the backseat by inserting the pegs under the
backseat into the openings on the floor of the car.
3
4
Flip out the dashboard and insert two UV lights into the
openings on the corners of the dashboard. Press the
buttons on top of the lights to turn it on. Then, replace the
dashboard to see the headlights light up.
Place the other two UV lights into the openings
on the walls of the car behind the backseat. Press
the buttons on top of the lights to turn it on and
watch the tail lights light up.
5
6
Flip up the steering wheel and insert the steering wheel coin.
Place the roof over the car. Then, press down
the top of the roof so it snaps into the hinges.
Lift up the roof and pull it all the way back
(as shown) until it snaps off its hinges.
NOTE:
The loud snapping sound it makes
when removing the roof is normal.
1
2
Place the roof upside down on a flat surface
and fill it with water. Do not overfill.
1
2
With the roof off, hold it firmly from the
center of the car and pull it out to extend.
To return to car mode, push the sides in.
Flip over the dashboard to turn it into a DJ’s booth.
Place the UV lights anywhere there is an opening.
3
4
Remove the seats to use them as
chairs outside of the car!
Replace the roof if desired.
NOTE:
Anytime you attach the roof, place
the roof at the angle it is shown.
