MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
Example ducting arrangement
Figure 14 shows an example of a ducting arrangement of the battery modules.
Figure 14 - Example ducting arrangement
Recommended options for the exhaust ducting are:
Add a drain to the lowest points in the ducting system. This will help to remove any liquids
for example the liquid of the PPS after a thermal runaway event;
Add a nozzle to apply air pressure to the ducting system. This will help to clean the exhaust
system from remaining gasses after a thermal runaway event and makes it safe to remove
the broken battery module.
