MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
5.2
Identification label
The identification label of the MG RS battery module is located at the front of the enclosure.
Example identification label:
Figure 4 - Example identifications label
The identifications label shown in figure 4 contains written information about the product. The
explanation of the symbols used on the identification label is stated in table 6.
Table 6 - Identification lable logo explaination
Declaration of conformity with health, safety, and environmental protection standards
for products sold within the European Economic Area as per directive
2014/35/EU.
Symbol indication the manual must be red before installation and use of the device.
Device is treated according the Waste Electrical and Electronic Equipment (WEEE)
Directive 2012/19/EU.
GS1 data matrix type barcode containing detailed product information.
