MFJ-902B Instruction
Manual
5
8. After the lowest reflected power (or SWR) is obtained in step 6, use the
INDUCTOR switch to reduce the inductance one switch position (L is the
lowest inductance setting). Adjust the TRANSMITTER and ANTENNA
controls for the lowest SWR. Continue this process until the lowest SWR
cannot be repeated, then use the INDUCTOR switch to increase the
inductance by one switch position (A is the highest inductance setting).
Tune for lowest SWR.
WARNING: Never transmit while changing the INDUCTOR switch.
Note: Always use as little inductance as possible. Step 7 minimizes the
inductance and maximizes the capacitance.
9. After a low SWR is obtained, the transmitter power may be increased to any
value up to 150 watts.
WARNING: Do not exceed 150 watts output. You will damage the tuner!
TECHNICAL ASSISTANCE
If you have any problem with this unit first check the appropriate section of this
manual. If the manual does not reference your problem or your problem is not
solved by reading the manual you may call
MFJ Technical Service
at
662-323-
0549
or the
MFJ Factory
at
662-323-5869
. You will be best helped if you have
your unit, manual and all information on your station handy so you can answer
any questions the technicians may ask.
You can also send questions by mail to MFJ Enterprises, Inc., 300 Industrial
Park Road, Starkville, MS 39759; by Facsimile to 662-323-6551; or by email to
[email protected]. Send a complete description of your problem, an
explanation of exactly how you are using your unit, and a complete description
of your station.