MFJ-1778 G5RV Multiband Antenna
8
When installing any coax sealer,
never
completely cover the barrel of the coax connector. The sealer
should
only
be placed near the junction of the threaded part of the connector and the knurled area of the
male connector. The bottom of the male connector's outer sleeve should be left open to permit the
connector to "breathe". Mount the connector vertically with the unsealed barrel end down so it does
NOT collect moisture!
Technical Assistance
If you have any problem with this unit first check the appropriate section of this manual. If the manual
does not reference your problem or your problem is not solved by reading the manual you may call
MFJ Technical Service
at
601-323-0549
or the
MFJ Factory
at
601-323-5869
. You will be best
helped if you have your unit, manual and all information on your station handy so you can answer any
questions the technicians may ask.
You can also send questions by mail to MFJ Enterprises, INC., P.O. Box 494, Mississippi State, MS
39762; by FAX to
601-323-6551
; through Compuserve at 76206,1763; or by email to
[email protected]. Send a complete description of your problem, an explanation of
exactly how you are using your unit, and a complete description of your station.