MFJ-1762 Parts List:
To begin, confirm that all necessary parts have been supplied with
your antenna package:
[ ]
1 - 6' x 1-1/8" OD boom
[ ]
2 - 54" x 1/4" OD element section (director)
[ ]
2 - 54-1/2" x 1/4" OD element section (driven element)
[ ]
2 - 59-1/4" x 1/4" OD element section (reflector)
[ ]
1 - 5/16" x 1/4" OD spacer
[ ]
1 - hairpin inductor
[ ]
2 - "L" bracket
[ ]
1 - #8 x 1/2" sheet-metal screw
[ ]
6 - 1/2" x 10-32 screw
[ ]
2 - 1/2" x 6-32 screw
[ ]
2 - 6-32 nut
[ ]
2 - 6-32 flat washer
[ ]
2 - 6-32 lock washer
[ ]
4 - Insulated polyethylene element-mounting grommets
[ ]
2 - #6 solder lug
[ ]
1 - 1 - U-bolt mounting hardware kit (U-bolt, mast clamp, nuts)
[ ]
Tube of Locktite
If any parts are damaged or omitted, please contact MFJ at (601) 323-0549 to arrange for
replacement.
Tools:
You'll need a selection of common household tools to construct your antenna:
Phillips-head screw driver (#2)
Straight-blade screw driver
Pliers
Utility knife or Ex-acto
knife with #11 blade
Soldering Set-up
Suggested Antenna Materials:
RG8-M Coax (also RG59 if stacking antennas)
Sealant (Seal-All
) or equivalent
Plastic electrical tape
Suggested Test Equipment:
MFJ-259 RF Analyzer or VSWR bridge