MFJ-1270C/1274C COMPUTER INTERFACING
Page 13
case, place a jumper across pin 1 and 2 of JMP 1. The DCD LED on the front
panel will function normally indicating received packets.
Apple Macintosh
The MFJ Starter Pack for the Macintosh (MFJ-1287) includes a terminal
program and a cable to connect the MFJ TNC to the Macintosh. If you should
want to use a terminal program such as MacTerm set the options according to
Table 2-3.
Compatibility Terminal
1200 baud
VT100
7 bits/character
ANSI
even parity
UNDERLINE
Handshake Xon/Xoff
US
modem connection
80 Columns
"telephone" port
ON LINE AUTOREPEAT
Table 2-3. MacTerm option settings for operation with MFJ TNC
Apple II, II+, IIe, IIc
For the Apple II family of computers with Apple or third- party serial interface
cards, you may use ASCII Express Pro, Hayes Smartcom IIe and DataCapture
4.0 for the MFJ TNC . There are others which may be compatible with the MFJ
TNC , but have not been tested.
Commodore C64, C128 and VIC-20
The optional Starter Pack for the C-64, C-128 and VIC-20 can be purchased
from MFJ Enterprises, Inc. or from any MFJ dealer. Starter Pack includes an
interface cable from the MFJ TNC TTL port to the user I/O port on the
commodore computer. A terminal program is also included. To order, specify
MFJ-1282 for software on disk or MFJ-1283 for software on tape.
If you do not have the MFJ Starter Pack then you may use the BASIC
communications program is given in the
Programmer's Reference Guide
