6. Also, you may stop the keyer on the word following the word to be deleted. Then press the
BACKUP button to make the editor move backwards one word. The DELETE button will then
delete the desired word. You may just as effectively stop the keyer five words after the desired
word to be deleted and backup five words. However, the more words you have to back up, the
more confusing it may become.
7. You may also insert words into the message. First stop the keyer and use the BACKUP function
to locate the desired position in the message. Then use the ADD button to enter the "Add"
mode and enter the desired words as in RECORDING MESSAGES above. After exiting the "Add"
mode recheck your message with the CONTINUE button. You may then exit the edit mode by
pressing the RECORD/EDIT switch to the out position.
The following is a sample Edit session:
1. Turn the MFJ-486 POWER on with all other switches in the out position. The POWER LED
should turn on in the Red color to signify that the A bank is active.
2. Press the RECORD/EDIT switch. The DELAY/EDIT LED should turn on.
3. Press the A3 address switch. The A3 LED should turn on to signify that this address has been
selected.
4. Press the ERASE switch. The DELAY/EDIT LED should blink to signify that the operation is
being performed.
5. Press the ADD switch. The DELAY/EDIT LED should blink. This puts the Editor in the "Add"
mode.
6. Send WORD1 from the key paddles. Press the ADD button to add a Word Space. The 486 will
emit a lower tone to acknowledge the word space input.
7. Send WORD2 from the key paddles. Press the ADD button to add a Word Space. Another lower
tone will be emitted.
8. Send WORD3 from the key paddles. Press the ADD button to add a Word Space. Again the
tone will be emitted.
9. Send WORD4 from the key paddles. Press the ADD button to enter the Word Space. Another
tone will be heard.
10. Press the ADD button again to exit the "ADD" mode. The DELAY/EDIT LED will blink to ac-
knowledge the operation.
11. Press the CONTINUE button to check the message. The DELAY/EDIT LED will blink and the
message will be played. When the message reaches the end there will be a delay as set by the
DELAY control and then it will be repeated. The DELAY/EDIT LED will turn off during the Delay
period.
12. After hearing and checking the message, press the dot paddle during the playing of WORD3.
This will stop the editor after the completion of WORD3. The DELAY/EDIT LED will blink when
the keyer stops.