100-5-01-000
3.0 DataGrabber Quick Start Guide
Before using the DataGrabber software, please use the following steps as a ‘quick start’
guide to set the initial parameters and perform a simple batch rip.
1. Open the DataGrabber software and on the main screen select the loader type and
the “Files” output format.
2. Click on the preferences button, open each of the four tabs individually and set the
preferences as below:
Rejects
•
Check “Reject discs which are not recognised...” and set to 2.5 minutes.
•
Check “Copy file creation and modification time stamps”
