MF DIGITAL OptiPrinter, Quick Start Manual

Page: 3 / 4

TP 000 023 (1.03) For Windows 2000 & XP only ZZ 004 805
CD/DVD Inkjet Printer
Guide
Printing a CD
6. Open Discus
Set Outer & Inner
Diameter
Ensure X & Y at
to 0mm
•
With Discus open, select the CD/DVD label type
•
Select the Print tab and click the Setup Button (see Fig.1).
•
Select M F Digital OptiPrinter from the drop-down list of printers. For paper size,
select A4 (210 x 297mm) and for source select Upper Tray
•
Click OK
•
Next, click the Select template Button and choose the M F Digital OptiPrinter
•
Adjust the position of the red slider buttons to set the Outer Diameter to 119.5mm
and the Inner Diameter to 39.5mm
Ensure that the X & Y Nudge Button dimensions are set at 0mm & 0mm
7. Run a Test Print
Ensure you have a blank CD loaded into the OptiPrinter’s tray.
Now click the
Test Print button and the Print Properties box appears. Ensure the M F Digital OptiPrinter is selected from the list of printers
(click icon once to highlight it).
•
Under the Setup tab, set Print Quality to Normal , and Disk Surface Type to Inkjet Quality/Other Inkjet
•
Under the Features tab, remove the tick from the Enable HP Preview
•
Under Mask Settings , remove the tick from Enable Masking
•
Select Print . A command box appears asking if you are “Ready To Print?”, select OK
A series of circles will print onto the blank CD and should look like Fig. 2 on the next page. However, minor adjustments may be required if the
circles on the test print do not print centrally (as shown in Fig. 3). Adjust the template on the Discus interface by using the X & Y
nudge keys to
move the template up, down, left, & right.
Note: Every OptiPrinter is factory set for the correct position, however, CDs can vary in size and it may be necessary to make minor adjustments
using the nudge feature.