C
ompressed-air Stapling Plier
Z 23 P
Page:
5
Mod.:
01/2022
ET
Seite 5 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
Read all these instructions before using the stapling device and keep the safety instructions in a
safe place.
The operating personnel must be trained in the handling of the stapling device and they must
have fully read and understood the operating instruction.
To avoid injury or damage, the operator must additionally observe the company's internal safety
guidelines!
In addition, we would like to refer to further national rules and safety provisions which are not
contained in this manual.
Keep persons who are not instructed away from your work area!
If damage to the device is determined by the operator during production, the device may no
longer be used and must be repaired by a professional!
The required personal protective equipment must be provided by the operator.
Only original parts may be used as spare parts!
2
Design features
2.1
General design features
Certain elements of the instructions for use have defined design features. This lets you easily see whether
a passage is
•
normal text,
•
a list of items, or
•
an action to be taken.
Tips provide additional information, such as special details about how to use the stapling
device cost-effectively.
2.2
Features of hazard warnings
All hazard warnings in these instructions for use follow the same pattern. To the left is a symbol
that indicates the type of hazard. To the right is a signal word that designates the severity of the
hazard. Below this is a description of the source of the hazard and instructions on how to avoid
the hazard.
