background image

   7

MEANING OF THE AP-

PLIED MARKERS

Safety instructions with a coloured back-
ground are mandatory and need to be 
observed under any circumstance!

 

This symbol indicates tips and recom-
mendations.

[ ]  Reference to a picture number.
( )  Reference to a function element within 

a picture. 

  Reference to a jamming area within a 

picture.

INTRODUCTION

Read and observe this manual before first 
operation. 
Children and juveniles should read this 
documentation together with their par-
ents respectively a supervisor or accom-
panying person before first use.

The present operating manual should help 
you as well as the controlling person (ac-
companying person), to get accustomed to 
the handling of your electric wheelchair as 
well as to prevent accidents.

 

Please note that the illustrated equip-
ment variants can deviate from your 
model.

We have therefore also listed chapters with 
options that might not be applicable for 
your individual electric wheelchair. A list of 
the available options and accessories can 
be viewed in the order form of your electric 
wheelchair.
Users with visual impairments can find the 
PDF-files together with further information 
on our website:

www.meyra.com

 >.

 

Contact your specialist dealer when re-
quired.

Alternatively users with visual impairments 
can have the documentation read out by a 
helper.
Inform yourself regularly about product 
safety and possible recalls of our products 
in the < 

Information center

 > on our website:

www.meyra.com

 >.

We have developed an electric wheelchair 
that complies with the technical and gov-
ernmental regulations of medical devices. 
For information about a severe accident 
that can still not be ruled out completely, 
please use our E-mail address < 

info@mey-

ra.de

 > and inform the responsible govern-

mental agency of your country.

LIST OF MODELS

This operating manual applies to the follow-
ing models:

Model 1.623

INDICATIONS / 

CONTRAINDICATIONS

In case of allergic reactions, skin rashes 
and/or pressure sores during the use of 
the electric wheelchair sores contact a 
doctor immediately.
In order to prevent contact allergies, we 
recommend to use the electric wheel-
chair only when wearing clothes.

The functional diversity of the electric 
wheelchair permits application in cases 
where extreme spasms and contractions of 
the skeletal muscles lead to contortions, un-
controlled movements, slipping away and 
functional losses as well as substantially to 
completely pronounced impairment of the 
mobility/walking in cases of structural and/

Summary of Contents for iChair DYNAMIC 1.623

































































Reviews: