10
DELAYING THE STARTING
TIME
The time between moving the joystick
and the wheelchair starting off can be set
smoothly from 0 to 3 seconds (e.g. for
spastic users).
Note:
This delay in the starting time can
only be set using the SERVICE Pro-
the SERVICE Pro-
the SERVICE Pro-
the SERVICE Pro-
the SERVICE Pro-
gramme
gramme
gramme
gramme
gramme and a PC.
Settings can also be made by
MEYRA.
Function options offered by service programmes
SECURING USING THE LCD
COMBINATION LOCK
The user can secure the SPRINT and the
OPTIMUS against unauthorised use via
a freely-selectable three-digit combina-
tion.
Benefits:
– Securing against unauthorised use.
– Programming the respective user's per-
sonal number combination prevents. -
The number combination being forgot-
ten as it is freely selectable.
– The combination lock can be deacti-
vated. -In the case of alternating users.
Handling:
– The combination lock can be pro-
grammed using the Service Pro-
gramme and a PC,
or
– by MEYRA.
1. Switch on the control box. – Three ze-
ros appear in the LCD.
Note:
Please familiarise yourself
with this
combination of digits
and keep it to
hand
at all times.
– This will make
matters easier in the event of the user
forgetting the combination or if own-
ership of the wheelchair changes
hands.
Remark:
The speed is displayed in the LCD once
the control box is switched on:
–
The combination lock is deactivat-
ed (please refer to "Activating the
combination lock").
–
No combination lock has been
programmed yet.
Deactivating the combination lock
1. The wheelchair is ready to start and
secured. – The LCD display shows
the speed indication.
2.
Keep the right-hand indicator pressed
and press
the ON/OFF button at the
same time
. – The wheelchair switches
off.
Activating the combination lock
1. The wheelchair is ready to start and
secured. – The LCD display shows
the speed indication.
2.
Keep the right-hand indicator pressed
and press
the ON/OFF button at the
same time
. – The wheelchair switches
off.
Note:
The Service Programme is included in
the Diagnosis Pack, article no. 1 024
869.
Note:
Three zeros appear in the LCD:
2. Set the desired number combination
by pressing the and buttons.
3. Once the third digit has been entered,
the LCD automatically changes to the
speed display.
LCD OPERATING DEVICE, CODE 416
Note:
Switching off
following data
entry au-
tomatically saves the new data
. Your
entry will be effective when the con-
trol box is switched on again.
