manualshive.com logo in svg

Meyra 2.850, Operation Manual, Page: 36 / 44

Share
Download
Meyra 2.850 Operation Manual Download Page 36

36   

Model: ............................................................................................................................ 2.850

 
Type plate: .................................................................................................................................... at the crossbrace tube
Life span: .......................................................................................................................................................................... 4 years

Dimensions: ............................................................min. / max. / manufacturer setting

Overall length (with leg supports): ................................................................................1010 / 1160 / 1010 mm
Length (without leg supports): ........................................................................................... 855 / 1005 / 855 mm
Overall width: ....................................................................................................................................580 / 850 / 630 mm
Overall height: ..................................................................................................................................885 / 975 / 930 mm
Back support height each adjustable by +2.5 cm ................................................................35 / 50 / 40 cm
Seat width: .......................................................................................................................................................38 / 65 / – cm
Seat depth: ....................................................................................................................................................40 / 49 / 43 cm
Front seat height , without cushion: .........................................................................................46 / 50,5 / 49 cm
Rear seat height : ....................................................................................................................................... 39 / 52 / 43 cm
Arm support height from seat surface: ....................................................................................21 / 25,5 / 21 cm
Back support to front edge of arm support: ..................................................................31,5 / 38,5 / 31,5 cm
Seat cushion thickness: ........................................................................................................................................ 3 / 6 cm
Height of push-handles:
Code 502 (steplessly adjustable): ........................................................................................................................20 cm
Back support angle: .............................................................................................................................................– / – / 90°
Seat inclination: ......................................................................................................................................................0° / 4° / 4°
Leg support angle (Code 93): .......................................................................................................................– / – / 111°

Foot support to seat, without seat cushion (lower shank length):
with leg supports code 808: ..............................................................................................................32 / 48 / 42 cm
with foot board Code 54: .....................................................................................................................32 / 48 / 42 cm

Summary of Contents for 2.850













































Reviews:

No comments