25
front/rear wheels in order to prevent a side-
ways tipping of the wheelchair.
Always maintain a safety distance between
the wheelchair and drops, stairs and similar
obstacles sufficient for reaction, braking and
turning.
If possible, let one or more helpers lift you
out of the wheelchair and carry you to the
destination point.
The crossing of stairs is only possible with
the assistance of two helpers who are fa-
miliar with the danger situation and firmly
guide the wheelchair.
☞
The helpers may only hold the horizon-
tal push bar and side frame without lift-
ing the wheelchair.
Existing support castors are to be removed,
since they might pose a danger to the aid
under certain circumstances.
Loading the wheelchair
Do not use the clothes guard, footboard
or accessory parts in order to lift the
wheelchair!
Before lifting, the wheelchair is to be se-
cured against unintentional rolling mo-
tions!
☞
Therefore observe chapter
The parts detached for loading must be
carefully stowed and carefully attached
again before the next journey.
The weight of the wheelchair is reduced
when you remove detachable components.
The wheelchair can be also loaded with the
aid of ramps or lifting platforms.
☞
Therefore observe the respective
user manual and the load capacity
of the ramp resp. lifting platform.
Transport in vehicles
The parts detached for the transport
must be carefully stowed and carefully at-
tached again before the next journey.
No special carrying points are allocated
for carrying detachable components.
The following procedures may be necessary
due to lack of space for the transport in ve-
hicles:
–
Folding over the back support.
–
Remove clothing guards.
–
Detach the drive wheels.
Summary of Contents for 1.155 NANO
Page 1: ...en Operating manual Adaptive wheelchair Model 1 155 NANO Model 1 156 NANO X...
Page 2: ...2...
Page 43: ...43 NOTES...
