1
2
4
3
20
BACK.SUPPORT
Back.support.belt
Fitting.the.back.belt
The tensioning of the back support [1]
is adjustable.
– Pull off the flap of the back sup-
port and fold it to the front [2].
– Open the Velcro fastener of the
belt (3) that you wish to adjust and
close it again after adjustment.
!
. Attention:
The overlapping of the loop and
hook strap has to be at least 10 cm!
– Fold the flap of the back support
back down and fasten it with the
velcro fastener [4].
