Meyer's VB750, Instruction And Parts Book

Page: 3 / 62

3 | P a g e
INTRODUCTION
Congratulations on the purchase of your new
Meyer’s Manure Spreader. With its optional
equipment this is the simplest, most flexible system
on the market today. With proper operation and
preventative maintenance, it will last for many
years.
This SAFETY ALERT SYMBOL means
ATTENTION! BE CAREFUL ! YOUR SAFETY IS
INVOLVED ! It stresses an attitude of HEADS UP
FOR SAFETY . When you see this symbol, be
alert to the possibility of PERSONAL INJURY and
carefully read the message that follows.
WARNING:
NEVER OPERATE WITHOUT ALL COVERS,
SHIELDS AND GUARDS IN PLACE. KEEP
HANDS, FEET AND CLOTHING AWAY FROM
MOVING PARTS. SOME COVERS AND
GUARDS HAVE BEEN REMOVED FOR
ILLUSTRATIVE PURPOSES ONLY IN THIS
MANUAL. FAILURE TO HEED MAY RESULT IN
SERIOUS PERSONAL INJURY OR DEATH.
At the front of this manual is a Product Registration
and Inspection Certificate. Be sure your dealer has
completed this certificate and forwarded a copy to the
manufacturer to validate the
manufacturer’s warranty.
The product model and serial number are recorded on
this certificate for your convenience and for proper
identification of your spreader by your dealer and the
manufacturer when ordering repair parts.
The serial number plate is found on the upper left front
corner of the spreader box or stamped in the left channel
at the front. For information on ordering repair parts, refer
to the repair parts section of this manual. Orders must list
the complete description, correct part number, and total
amount required.
All references to right hand and left hand apply to the
product as viewed from the rear of the machine and
facing the direction of forward travel.
You are urged to study this manual and follow the
instructions carefully. Your efforts will be repaid in better
operation and service as well as a savings in time and
repair expense. Failure to read this manual and
understand the machine could lead to serious injury. If
you do not understand instructions in this manual, contact
either your dealer or Meyer’s Equipment Manufacturing
Corp.
This supersedes all previous published instructions.
Contact Information
Meyer’s Equipment Mfg. Corp.
701 W Bus Cty Rd A
P.O. Box 406
Dorchester, WI 54425
Phone: (715)-654-5200
Fax: (715)-654-5558
Email: emcdorchester@tds.net