Meyer's 390 Tandem, Instruction And Parts Book, Page: 7 / 52

Model 390 Page 7
SAFETY DECALS
DECAL L. PART NUMBER 3002 DECAL M. PART NUMBER SW2001
DECAL O. REFLECTIVE TAPE-RED
DECAL N. PART NUMBER SW2000
DECAL P. REFLECTIVE TAPE YELLOW PART NO.
PM17-5910
DECAL Q. PART NO. 3009
DECAL R. PART
NUMBER 3008
DECAL S. PART NO.
SW406
START UP PROCEDURE
1. Make certain everyone is clear of machine before start-
ing engine or operation.
2. Turn Flow Control to Slowest Position.
3. Engage P.T.O.
4. RAISE END GATE.
5. Engage Tractor Hydraulic Lever to Full Flow Position.
6. Start Apron by Rotating Flow Control Dial Clockwise.
DECAL T. PART NO. 3011
CAUTION: IF ANY SAFETY DECAL BECOMES UNREADABLE FOR ANY REASON, THE DECAL
MUST BE REPLACED WITH A NEW DECAL. IF THE SPREADER IS REPAINTED, ALL SAFETY DE-
CALS MUST BE REPLACED. CONTACT YOUR DEALER OR MEYER’S EQUIPMENT MANUFACTUR-
ING CORP. IF YOU REQUIRE ANY SHIELD OR DECALS FOR REPLACEMENT.