Dis-Mount Plow From Vehicle
A.
Press down button until fl oat
light turns blue.
B.
Push lift arm down until there is slack in the chain.
C.
Remove crankstand from lift frame.
D.
Attach crankstand to a-frame
E.
Adjust crankstand until crankstand comes into contact
with the ground and then turn 1 to 2 revolutions.
F.
While slightly pushing the lift frame towards vehicle pull handles on either side to
disengage pins then twist until the leg locks the pin in the open position.
G.
Disconnect one piece electrical plug and install weather cover
on male end.
H.
Back vehicle away from plow assembly.
Meyer Products assumes no responsibility for installations not made
in accordance with these instructions.
(9)
For Mounting and Dis-mounting instructional video’s please visit www.youtube.com/meyerproducts
