18
light indicates the snow plow is
now in the Lower/Float position.
In this position the snow plow
will be able to follow the contour
of the road and the snow plow
can also be angled to the left
or right. Touching the up arrow
automatically cancels the Lower/
Float position.
While angling left or right or rais-
ing the snow plow if the button is
pressed for more than four seconds the operation will be cancelled.
This feature eliminates unnecessary amp draw from the vehicle
charging system.
This switch is self diagnosing. The monitor light is located in the
upper left corner next to the float light of the control switch. When
the monitor light turns on and begins to flash the control switch is
sensing a problem with a specific coil/connection on the hydraulic
unit. The label below is on the back side of your control switch.
Reset is accomplished by turning off the ignition switch or by turn-
ing the power switch off momentarily and then back on. If the moni-
tor light is still illuminated after attempts to reset the switch have
failed, contact your nearest authorized Meyer Distributor for repairs.
22690
Pistol Grip Controller