background image

MEYER LIMITED WARRANTY EFFECTIVE May 1, 2010

Meyer, warrants to the original purchaser of Meyer brand products that they will be free from defects in materials or workmanship for a 
period of one year from date of purchase to only the original owner.

This warranty does not cover:
• Problems caused by failure to follow the product instructions, failure to maintain the product as described in the  Operator’s Manual, or 
failure to maintain proper levels of lubricants;
• Problems caused by contamination or restriction of lubricant systems, or damage resulting from rust, corrosion, freezing or overheating;
• Paint, or expendable snow plow parts such as pins, wheels, cutting edges, chrome plating and springs;
• Damage to any vehicle to which the products are mounted;
• Damage caused by usage that is not in accordance with product instructions, usage in an commercial or heavy duty environment (use 
of the snow plow for any purpose other than plowing snow is considered misuse and abuse);
• Any snow plow, or any part which has been modified or altered;
• Problems caused by using accessories, parts, or components not supplied by Meyer,
• Cost of tax, freight, transportation or storage charges, environmental charges, solvents, sealants, lubricants or any other normal shop 
supplies.
• Problems caused by collision, fire, theft, vandalism, riot, explosion, lightning, earthquake, windstorm, hail, water, flood, or any other 
Acts of God;
• Liability for damage to property, or injury to, or death of any person arising out of the operation, maintenance or use of the covered product;
• Products with missing or altered serial numbers;

Meyer will repair any product that proves to be defective in materials or workmanship.  In the event repair is not possible or practical 
(as determined by Meyer in its sole discretion), Meyer will either replace the product with a new product of similar model and price, or 
refund the full purchase price, as determined by Meyer.

Customer must keep the plow serviced/maintained as recommended by Meyer.  A written record of service must be maintained, along 
with receipts for maintenance materials purchased.  A copy of the maintenance record and pertinent receipts may be requested in the 
event of a claim.  

18513 Euclid Avenue 

Cleveland, Ohio 44112

 www.meyerproducts.com

216-486-1313

FORM #4-563

In order to obtain service under this warranty, the original purchaser must:
• Return the claimed defective part to any authorized Meyer Dealer, transportation 
and freight charges prepaid.  Only Meyer Dealers are authorized to perform the 
obligations under this warranty.  For the address and telephone number of the 
Meyer Dealer nearest you go to www.meyerproducts.com.
• Provide maintenance record and receipts for required maintenance if requested
•  Allow inspection of damaged parts and/or  if deemed necessary by Meyer.
• I t is the responsibility of the original purchaser to establish the warranty period 

by verifying the original delivery date.  A bill of sale/sales receipt, cancelled 
check or some other appropriate payment record may be kept for that purpose.

Summary of Contents for Drive Pro LD



























Reviews: