Dis-Mount Plow From Vehicle
For Mounting and Dis-mounting instructional video’s please visit www.youtube.com/meyerproducts
Meyer Products assumes no responsibility for installations not made in
accordance with these instructions.
B. Push lift arm down until there is a little slack in the chain.
C. Remove crankstand
from lift frame.
D. Attach crankstand to
a-frame.
E. Adjust crankstand until crankstand
comes into contact with the ground
and then turn 1 to 2 revolutions.
F. Pull handle on drivers side to dis-engage pins then twist until the
notch locks open the pins.
H. Back vehicle away from plow assembly.
(8)
A. Press down button until
float light turns blue.
G. Disconnect both electrical
plugs and install weather
cover on both ends.