Driver Side Template
Top of Cutting Edge
Edge of Moldboard
9/16" Hole
5-3/8"
2-3/4"
6-29/32"
Page 1: ...er Side Wing 2 19801 1 LH Driver Side Wing 3 19797 4 Wing Angle Bracket 4 19870 1 LH Driver Side Wing Rubber Edge 5 19786 1 RH Passenger Side Wing Rubber Edge 6 12787 2 Strap 08887 1 Hardware Bag 7 12691 2 Wing Bracket 8 20097 6 Bolt 1 2 13 x 2 Gr 5 9 20307 10 Locknut 1 2 13 10 20355 20 Flawasher 1 2 11 20361 4 Flatwasher 1 12 811000224 4 5 16 Klik Pin 2012 Printed in the U S A Meyer Products LLC ...
Page 2: ...nd 1 2 13 Locknuts 9 Do not tighten at this time D Slide RH passenger side Wing 1 onto Wing Angle Brackets 3 and install 1 Flatwashers 11 and 5 16 Klik Pin 12 E Adjust RH passenger side Wing 1 up or down until Wing Angle Brackets 3 are flush with moldboard and Wing Rib F Tighten 1 2 13 Locknuts 9 at this time G Install RH passenger side Wing Rubber Edge 5 to RH passenger side Wing 1 using 1 2 13 x...
Page 3: ...Driver Side Template Top of Cutting Edge Edge of Moldboard 9 16 Hole 5 3 8 2 3 4 6 29 32 9 16 Hole ...
Page 4: ...Passenger Side Template Top of Cutting Edge Edge of Moldboard 9 16 Hole 9 16 Hole 5 3 8 2 3 4 6 29 32 ...
