Meyer Sound UPJunior UltraCompact VariO, Operating Instructions Manual

Page: 25 / 44

UPJUNIOR OPERATING INSTRUCTIONS
25
CAUTION: The 1/4” center holes are not rated
for flown loudspeakers. These holes should
only be used for pole-mounting with an adapter.
Wall-Mounting with the MUB-UPJunior
The MUB-UPJunior U-bracket lets you mount the UPJunior
either vertically or horizontally on a wall.
Ceiling-Mounting with the MUB-UPJunior
The UPJunior can be mounted on a ceiling, underbalcony, or
canopy area with the MUB-UPJunior U-bracket.
Truss-Mounting with the MUB-UPJunior
An array of UPJuniors (with the MAAM-UPJunior array
adapter) can be mounted on a truss with the MUB-UPJunior
U-bracket. The top loudspeaker in the array is attached to
the MUB-UPJunior U-bracket and the U-bracket is attached
to the truss with two “C” or “G” hanging clamps (not
included).
NOTE: When flying an array of UPJuniors from
the MUB-UPJunior U-bracket, the bracket
should be fastened to the holes near the rear of the
loudspeaker plates, to compensate for the shift in
center of gravity. In addition, shackles can be
attached to the array adapter plate’s rear pickup
holes for additional support or to provide control over
the vertical tilt.
Floor-Mounting with the MUB-UPJunior
The UPJunior can be mounted on a floor or stage lip (for
front-fill applications) with the MUB-UPJunior U-bracket.
MUB-UPJunior, Vertical Wall Mount
MUB-UPJunior, Horizontal Wall Mount
MUB-UPJunior, Ceiling-Mounted
!
MUB-UPJunior with MAAMP-UPJuniors, Truss-Mounted
MUB-UPJunior, Floor-Mounted