Meyer Sound Compact VariO UPJ-1P Operating Instructions Manual Download Page 3

iii

SYMBOLS USED

These symbols indicate important safety or operating features in this booklet and on the chassis:

1  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this loudspeaker near water.

6.  Clean only with dry cloth.

7.  Do not block any ventilation openings. Install in ac-

cordance with Meyer Sound's installation instructions.

8.  Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus that produce 
heat.

9.  Do not defeat the safety purpose of the grounding-

type plug. A grounding type plug has two blades and 
a third grounding prong. The third prong is provided 
for your safety. If the provided plug does not fit into 
your outlet, consult an electrician for replacement of 
the obsolete outlet.

10. Protect the power cord from being walked on or 

pinched, particularly at plugs, convenience recep-
tacles, and the point where they exit from the loud-
speaker. The AC mains plug or appliance coupler shall 
remain readily accessible for operation.

11. Only use attachments/accessories specified by Meyer 

Sound.

12. Use only with the caster rails or rigging specified by 

Meyer Sound, or sold with the loudspeaker. Handles 
are for carrying only.

!

CAUTION:

 Rigging should only be done by 

experienced professionals.

13. Unplug this loudspeaker during lightning storms or 

when unused for long periods of time.

14. Refer all servicing to qualified service personnel. 

Servicing is required when the loudspeaker has been 
damaged in any way, such as when the power-sup-
ply cord or plug has been damaged; liquid has been 
spilled or objects have fallen into the loudspeaker; rain 
or moisture has entered the loudspeaker; the loud-
speaker has been dropped; or when for undetermined 
reasons the loudspeaker does not operate normally.

!

Dangerous voltages: risk of 

electric shock

Important operating 

instructions

Frame or chassis

Protective earth ground

Pour indiquer les risques 

résultant de tensions 

dangereuses

Pour indequer important 

instructions

Masse, châssis

Terre de protection

Zu die gefahren von 

gefährliche spanning zeigen

Zu wichtige betriebs-

anweisung und unter-

haltsanweisung zeigen

Rahmen oder chassis

Die schutzerde

Para indicar voltajes 

peligrosos.

Instrucciones importantes 

de funcionamiento y/o 

manteniento

Armadura o chassis

Tierra proteccionista

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for Compact VariO UPJ-1P

































Reviews: