Meyer Sound Amie-Sub, Operating Instructions Manual

Page: 28 / 32

AMIE-SUB OPERATING INSTRUCTIONS
28
AMPLIFIER
Type 2-channel, open-loop, class D
Total Output Power 1100 W peak
Note: Peak power based on the maximum unclipped peak voltage the amplifier will produce into the
nominal load impedance.
THD, IM TIM <.02%
Cooling Convection
AC POWER
Connector powerCON 20 input with loop output to feed Amie loudspeakers
Automatic Voltage Selection 90–265 V AC
Safety Agency Rated Operating Voltage 100–240 V AC, 50–60 Hz
Turn On/Turn Off Points 90 V AC turn-on, no turn-off; internal fuse protection above 265 V AC
Current Draw
Idle Current 0.25 A rms (115 V AC); 0.23 A rms (230 V AC); 0.25 A rms (100 V AC)
Maximum Long-Term Continuous
Current 1.4 A rms (115 V AC); 0.7A rms (230 V AC); 1.5 A rms (100 V AC)
Burst Current 2.9 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
Note: AC power cabling must be of sufficient gauge so that under burst current rms conditions, cable
transmission losses do not cause the loudspeaker’s voltage to drop below the specified operating
range.
Maximum Instantaneous Peak Current 7.4 A rms (115 V AC); 3.7 A rms (230 V AC); 8.5 A rms (100 V AC)
Inrush Current <20 A peak
PHYSICAL
Dimensions W: 24.00 in (609 mm) x H: 17.5 in (444 mm) x D: 19 in (482 mm)
Weight 74 lb (33.5 kg)
Enclosure Premium multi-ply birch with low-gloss, slightly textured black finish
Protective Grille Powder-coated, hex-stamped steel with optional cloth grille that attaches to the steel grille
Rigging Side nut-plates with 3/8-inch - 16 threads for the optional MUB-Amie-Sub U-bracket
ENVIRONMENTAL
Operating Temperature 0 °C to +45 °C
Non Operating Temperature –40 °C to +75 °C
Humidity To 95% at 45 °C (non-condensing)
Operating Altitude To 5,000 m (16,404 ft)
Non Operating Altitude To 12,000 m (39,000 ft)
Shock 30 g 11 msec half-sine on each of 6 sides
Vibration 10 Hz – 55 Hz (0.010 m peak-to-peak excursion)