MEWOI MEWOI9000G, User Manual

Page: 13 / 21

-10-
The storage interval is defaulted to “00” min each time the
instrument is turned on, that is to say, no measured value
is stored.
6. Data Inquiry
At the measurement state, press the MEM key to access the function
menu, press the UP or DOWN arrow keys to move the cursor to Data
Inquiry item, and press the MEM key to enter the inquiry submenu. Inside
the inquiry submenu, the first left line display the current page number and
total pages, the third line displays three sets of recorded values, and the
right side displays the page number increment. It is allowed to rapidly
navigate to the desired page number. Press the UP or DOWN arrow keys
to move the cursor and select the page number increment and then press
the MEM key to confirm the selection.
Press the MEM key with the cursor located at certain data set to display
the detailed information about this data set, including the set number
/stored data sets, current amplitude and recording time, etc.
Generally speaking, press the arrow keys to move the cursor and press
MEM key to confirm the selection under the inquiry submenu. The relevant
display is as shown in the following figure: