Meusburger H 4062, User Manual

Page: 7 / 12

shut-off valve
(main switch)
manual slide valves
on the table
moveable pallets
(consumers)
H 4062 Assembly table
to be installed by
the operator
pressure regulator
with manometer
pneumatic source
5. Installation and commissioning
The assembly table must be placed in such a way that it is no closer than 0.5 m to any surrounding
fittings. In order to guarantee the stability of the table, it must be placed on a firm surface in a hori-
zontal position, to be verified using the spirit level supplied. The feet of the table can be adjusted
for this purpose.
In order to avoid exceeding the maximum air pressure, a pressure regulator (not inclued in the
delivery) must be installed upstream of the compressed air connector of the assembly table, be-
fore commissioning. In order to ensure that the compressed air supply can be shut off, a stop-cock
(not inclued in the delivery) must also be fitted upstream of the compressed air connector of the
assembly table.
5.1. Compressed air supply / pneumatics connection plan
The element used for connections to the assembly table is a coupling with d1:9.
7