30 / 31
Y
Y
Before you insert the drawers into the frame, please ensure that the ball bearing sliders
(on the assembled unit) have been placed to the front of the main unit. If the bearings are
in the middle of the slider it will be difficult to install the drawers correctly.
Insert the drawer into the assembled frame as show below. Keep each side of the drawer
straight and aligned correctly to the sliders on the assembled frame.
Gently start to push the drawer into position, the drawer sliders should start to connect with the
sliders on the assembled frame. Once connected apply even pressure to each side and gently
push the drawer into place.
The ball bearings should catch the drawer sliders, once they do you may find that you need to
apply more pressure, this is perfectly normal as long as you are keeping the drawers straight,
push the drawers 100% of the way in. Finally slide drawer in and out a few times to ensure the
ball bearings are running smoothly in the slider. Installation is complete.
At any stage throughout the install process you feel like the drawers are not evenly sliding into
the assembled frame, please remove the drawers before they start to attach to the bearing slider
and start the install steps again.
BODY
LEFT
RIGHT
TOP VIEW
DRAWER
BODY
LEFT
RIGHT
TOP VIEW
DRAWER
Drawer Installation Guide
Basic Kitchen Cart
Hampshire 2 Drawer 2 Door Kitchen Storage Trolley
