background image

2 / 12

Tips before you start:

Please check that all parts are present before you start the assembly of your furniture.

Please do not start to build your item if any parts are damaged as this may void your 

warranty. Please contact the retailer immediately so they can advise what you should do.

For ease and speed of assembly, we recommend that before you commence each 

step of the assembly, that you identify all the par

ts required for that step.

Important

Please read these instructions carefully before use and keep for future reference.
• This product is intended for domestic use only and is not designed for commercial use.

• Do not 

assemble/use 

this item if any components are missing or damaged.

   Please contact the retailer straight away.

• DO NOT attempt to modify your item as this will void your warranty.

   Please call the retailer for required parts.

• Assembly to be carried out by a competent adult only.

• During assembly children should be kept away from the product due to possible risk of

   injury.

Please refer to separate Warranty Certificate for full warranty details and information.

Summary of Contents for 102077-05















Reviews: