Foreword and general instructions
General operating instructions
The subsequent instructions are of a general nature. The procedures identified by
red numbers
must be completed when using a system camera in conjunction with an SCA 3000 adapter.
All steps identified by red numbers and • are completed with the 301 standard base.
All steps identified with an asterisk * must be additionally adjusted, depending upon the given
type of camera.
When manual settings are necessary on the control unit it is always first necessary to press the
corresponding button assigned to the given function. The symbol of the selected function will
flash for approx. 5 seconds. The value of the function has to be changed with the + buttons
during these 5 seconds, otherwise the existing value will be retained
.
Example:
The zoom setting is to be changed.
1. Press the manual zoom control button (32) - Zoom will flash for approx. 5
seconds.
2. As long as zoom is flashing press the + button (24) to raise the value, e.g. from
50 to 70. Zoom stops flashing after 5 seconds and the changed value is stored.
NOTE: These instructions show illustrations of the LC display. The distances indicated in
these illustrations are only examples and not binding!
5
