17
4. Menu System
4.1 The programme menu
The programme menu is used to tune the television to the desired
stations. The menu is called with the
PROG
key.
It cannot be called if an external device connected to
the TV set (such as a video recorder) is running.
Selecting and storing stations
• Switch on the television with the power switch.
• Select any programme position. If there is no station being
received on this position, the text „NO SIGNAL“ is displayed on
the screen and the sleep timer displays the remaining time until
the set is automatically switched off.
• Press the
PROG
key to display the programme menu on the
screen.
• The field „AUTO“ is displayed in pink, indicating that it is active.
• If you know the band in which the desired station is transmitted,
you can select the field „BAND“ with the P
key and then
select the band VHF1, VHF 3 or U with the
VOL or VOL
key.
• If you do not know the band, you can start the automatic station
search with the
VOL or VOL
key. When the end of a band is
reached during this search, the TV set automatically switches to
the next band.
• If a station is found, the search stops. If necessary, you can
select the fine-tuning field „FINE“ with the P
key and adjust
the tuning with the
VOL or VOL
keys.
• Then select the field „PRG“ with the P
key and use the
VOL
or VOL
key to select the programme position number under
which this station is to be stored.
• Press the red „MEMO“ key to store the setting.
• Press the P
key to return to the field „AUTO“ and start the sta-
tion search again with the
VOL or VOL
key.
Repeat the above steps to store all stations available in your area.
Exit from the menu by pressing the TV key
IJ
.
4.2 The Video Menu
Three different picture settings have been preset in the factory for
the video values brightness (BRI), colour (COL) and contrast (CON).
1. Normal setting
These values are set by the user and can be modified as desired.
2. setting (for daytime viewing)
The video values for this setting have been preset in the factory.
3. Normal- setting (for viewing in the evening)
These video values are also factory settings.
You can select one of the above settings by repeatedly pressing the
NORMAL key on the remote control until the desired setting is dis-
played.
The three possible settings (NORMAL, , NORMAL-) are
briefly displayed in the centre of the screen.
Adjusting the picture settings
• Press the YELLOW key on the remote control.
• The video menu is now displayed.
• Use the P
or P
keys to select the field for brightness (BRI),
colour (COL), contrast (CON) or sharpness (SHA).
• In the selected field, adjust the setting to the desired value with
the
VOL or VOL
key.
• Store the setting with the RED key.
• Exit from the menu by pressing the TV key
IJ
.
• The modified settings can now be activated with the
PP
key.
Calling „Personal Preference“ settings (PP)
The Personal Preference settings can be called only when the TV
set is switched on and not in standby mode.
Press the
PP
key to call the settings.
Note:
1.
PP
may also be activated while a menu is displayed on the
screen.
2.
PP
can be used to call the preset values for both video and
audio.
BRI
I I I I I I I I I I I I I I I I I I I I I I
COL
I I I I I I I I I I I I I I I I I I I I I I
CON
I I I I I I I I I I I I I I I I I I I I I I
SHA
I I I I I I I I I I I I I I I I I I I I I I
M
AUDIO
EXTR
ķ
AUTO
I I I I I I I I I I I I I I I I I I I I I I I I I
PRG
1
FINE I I I • I I I
BAND
U
SYS BG
M
