manualshive.com logo in svg

Metz Flat-Cinema-TV 40 TK 81, Operating Instructions Manual

Share
Download
Metz Flat-Cinema-TV 40 TK 81 Operating Instructions Manual Download Page 25

25

5.6 Operation with External Devices 

Video recorder

• Ensure that the TFT monitor and the video recorder are both switched off.
There are three ways of connecting a video recorder to the TFT monitor:

- via the antenna input (see the operating instructions for your video recorder);
- with a SCART cable connected to input SCART1 or SCART2;
- via the Y/C input if your video recorder has an S-Video output.

• Switch on the TFT monitor and the video recorder.
• To switch to the input where your video recorder is connected (such as SCART1), press the 

AV

key several times.

DVD player

• Ensure that the TFT monitor and the DVD player are both switched off.
• Connect your DVD player to the SCART1 socket or, if the player has an S-Video output, to the Y/C input.
• Switch on the TFT monitor and the DVD player.
• To switch to the input where your DVD player is connected, press the 

AV

key several times.

SCART 1

Fullscreen

SCART 1

Fullscreen

Summary of Contents for Flat-Cinema-TV 40 TK 81









































Reviews:

No comments

Brands by name

Popular brands

Load more brands