Metz Bristol-72 MF 72TL68 Operating Instructions Manual Download Page 57

Page: 57 / 64

Problem

Possible cause

Remedy

The TV set does not
react to commands
from the remote con-
trol unit.

• There is no visual contact bet-

ween the remote control unit
and the TV set.

• Sunlight is falling directly on

the infrared of the TV set.

• The batteries in the remote

control unit are exhausted.

• The TV set has been switched

off with the mains switch.

• The microprocessor is faulty.

• Ensure that there are no

obstacles.

• Avoid direct exposure

to sunlight.

• Replace the batteries.
• Switch on the TV set

with the mains switch.

• Switch the TV set off

with the mains switch
and then switch it on
again.

Unnatural colours,
coloured spots on
the screen

• Strong magnetic fields in the

vicinity of the TV set (from
loudspeakers or other devices)

• Move the loudspeakers

away from the TV set.

• If the coloured spots per-

sist, switch the TV set off
with the mains switch, wait
a few seconds and then
switch it on again.

After the TV set has
been switched on,
the message „Please
enter code“ is
displayed.

• The childlock function has

been programmed to prevent
selection of any station.

• Enter the code number

with which the childlock
function was pro-
grammed.

The TV set does not
switch to the selected
programme position.
Instead, a list of sta-
tions is displayed with
a teddy-bear symbol.

• The childlock function has

been programmed to permit
selection of only the stations
shown in the list.

• Enter the code number

with which the childlock
function was pro-
grammed.

You have switched
off the TV set with
the

key, but the

green LED is still on.

• The TV set is currently collec-

ting EPG (electronic program-
me guide) data from the selec-
ted NextView station.

• Leave the TV set as it is.

It will switch itself off
automatically once all
available data have
been collected.

604 47 2017.A1 23.09.2004 14:45 Uhr Seite 57

Summary of Contents for Bristol-72 MF 72TL68

































































Search results

Summary of Contents for Bristol-72 MF 72TL68

Reviews:

Related manuals for Bristol-72 MF 72TL68

Brands by name

Popular brands

Metz Bristol-72 MF 72TL68, Operating Instructions Manual

Search results

Summary of Contents for Bristol-72 MF 72TL68

Reviews:

Related manuals for Bristol-72 MF 72TL68

Brands by name

Popular brands