- 54 -
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the rear side of the
TV.
Your PLASMA Television is capable of dis-
playing High Definition pictures from devices
such as a High Definition Satellite Receiver
or DVD Player. These devices must be con-
nected via the HDMI socket (EXT-6) or Com-
ponent Socket (EXT-4). These sockets can
accept either 720p or 1080i signals.
Note:
For proper connection of a device to
HDMI input of your TV via using a DVI-to-
HDMI cable, use PC Audio In input for sound
connection.
Via The Scart
Plasma TV has
3
Scart sockets. If you want
to connect peripherals (e.g. video, decoder,
etc.) which have Scart sockets to the TV, use
SCART 1, SCART 2 or SCART 3.
If an external device is connected via the
Scart sockets, the TV will be switched to AV
mode automatically.
• Do not connect Digital Set Top Box devices
via Scart 1. Use Scart 2.
Use Scart 3.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
Scart socket, you should connect it to the
Aerial input of the TV.
If the VCR is connected via Aerial input it
is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of
programmes
. Most of them are free, others
are to be paid for by the viewer. This means
that you will need to subscribe to the broad-
casting organisation whose programmes
you wish to receive. This organisation will
supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to
SCART 1
.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to
SCART
sock-
ets.
Playback NTSC
To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the rear side of the TV.
Then, press
AV
button to select appropri-
ate source.
Copy Facility
Source selection for
VCR
recording.
• Select
Feature
menu.
• Select
Ext-2 Out
by pressing
_
/
`
button.
• Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable from the aerial
socket of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the
Install
menu and select
search
.
• Search for the test signal of your video re-
