METVISA BMK Series, Instruction Manual

Page: 8 / 16

8
WARNING!
If the device cannot process the product or stops processing, reduce the quantity of food
before insert it on the Cup and check if the ingredients sequence was attended: first liquid
ingredients, then pastes and for last powdered food.
Exceeding the necessary food processing time (average 1 minute), can prejudice the speed and
performance of the motor and also the device’s life cycle.
WARNING!
Even existing a sensor on Cup Support (which does not let the device work if the Cup is not
properly mounted) it is recommended not to remove the Cup with the device turned on, also
never place fingers, hands or objects (as spoons and knifes) on Cup, it might cause an accident.
Any irregularity contact the nearest authorized service .
IMPORTANT
The operator must use the appropriate PPE (personal protective equipment). For example:
use cap in hair preventing it from locking up in moving parts and appropriate gloves to
guarantee hygiene when handling food, also protects the operator during the process.
5. Cleaning and Maintenance
5.1 Procedures for Cleaning and Products to be used
Your device was built with first class materials, so use it correctly and get great satisfaction.
Keep it always clean and well maintained, by doing this, your device will have longer life cycle .
You must do daily cleaning on the device for a good operation and durability.
WARNING!
Before performing maintenance or cleaning, ensure that the On/Off Switch is in position "0"
(off) and that the plug is disconnected from the mains.
Do not use water jet to clean the device.
IMPORTANT
This device is not intended to be fully immersed in water for cleaning.
Follow the instructions below to learn which parts can be immersed and which one needs
special care.
Demountable part (Cup only) should be removed from the device and washed with warm
water and mild detergent. Thoroughly clean the corners, eliminating waste from the food.
The device must be cleaned as many times as possible, to prevent dry food waste from
sticking on parts. To clean, dilute soap or mild detergent on warm water and apply with a soft cloth.
Use a cloth humidified with water, rinse and then dry all parts with a soft dry cloth.