background image

 

 

1.  Safety Information 

 
 

1.1 General Warnings 
 

• Cautions / precautions must be observed when installing, using, maintaining and discontinuing use of this 
appliance; 
 
•  Before  carrying  out  any  operation  (assembly,  utilization  (use),  maintenance  and  reuse  after  prolonged 
use of the equipment), read the manual carefully; 
 
• The equipment must be used by trained personnel familiar with the use and safety standards described 
in this manual; 
 
This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced  physical,  sensory  or 
mental  capacities,  or  people  with  lack  of  experience  and  knowledge,  unless  they  have  received 
instructions  regarding  the  use  of  the  appliance  or  are  under  the  supervision  of  a  person  responsible  for 
their safety; 
 
• It is recommended that children be supervised to ensure that they are not playing with the equipment; 
 
• In case of change of the personnel that will work with the equipment, the new operator must be educated 
about the standards and the operation of the same one; 
 
•  The  operator  must  use  the 

Adequate  PPE's 

(equipment  for  individual  safety).  As  for  example:  use 

touches the hair avoiding that they lock in the moving parts of the machine; 
 
• The operator must always be aware of situations that can cause a risk of accidents and avoid them. For 
example:  avoid  working  with  loose  uniform  sleeves,  where  they  can  lock  in  moving  parts,  causing 
accidents; 

• After being held to read and answered all the questions, this manual must be stored carefully in place of 
easy access, known by all the people who will operate the equipment and made available for the people 
who carry out maintenance, to any queries. Whenever any questions arise, be sure to check the manual. 
Do not operate the appliance in any way with doubts; 
 
• Before starting cleaning and any maintenance, it is essential to disconnect the appliance from the power 
supply; 
 
• Periodically check the condition of the cables and electrical parts; 
 
• In the installation, it is essential to make this manual available to the professionals who will do the same; 
 
• Never place hands, fingers or objects inside the cup while the  appliance is on, as this could cause an 
accident

;

  

 
• Never turn on the appliance with the cup uncovered, and also don't remove the cup while the appliance in 
operation; 
 
• Do not leave  the  appliance  turned  on  without  supervision and  operating for more  than  3  uninterrupted 
minutes;

 

 

 
•  This  appliance  is  intended  for  home  use  and  similar  applications  such  as:  shop  kitchens,  offices  and 
other similar workplaces; farm houses; by customers in hotels, motels and other similar places; dormitory 
environments and small meals. 

 

 

                    ATTENTION! 

 
Do not perform repairs on your own. Refer servicing to qualified service personnel. Use only 
original parts in your appliance. 

Summary of Contents for BIMG LAR.1,5





















Reviews: