Auto*Therm 395, Shortwave Diathermy
27
8 Summary
of
operations
See section
•
Connect the appliance to the power outlet.
3.1
•
Connect the applicator(s) to the device.
3.5
•
Attach the applicator(s) to the patient.
4
•
Turn on the unit using the power switch
(1)
.
3.2
•
Select the mode of operation, selectors
(3)
,
(4)
,
(5)
.
3.3
•
Select the applicator(s), selectors
(6)
to
(11)
.
3.4
•
Set the treatment time
(12)
,
(13)
.
3.6
•
Start power output by turning intensity control knob clockwise.
Wait for tuning.
3.7
•
Turn the intensity control knob
(17)
.
3.7
Electric power is applied to the output, the treatment timer starts operation.
•
When the chosen treatment time has completed, the unit automatically turns off and
beeps for about 10 seconds. After one minute the unit automatically resets to its initial settings.
You may also reset the unit immediately, by turning intensity knob
(17)
counterclockwise.
•
When an error is displayed (except
FE)
press the
“RESET”
button
(2)
. Readjust parameters, if
necessary for correct operation.
•
The entire unit is turned off by pushing the on/off switch
(1)
to the off position.
Summary of Contents for Auto Therm 395
