I 03
S A F E T Y I N S T R U C T I O N S
Class 2 Laser Product
Max. Power Output: ≤ 1mW
Wavelength: 510nm-640nm
LASER RADIATION:
DO NOT STARE INTO BEAM.
DO NOT DIRECT EYE EXPOSURE.
ACOID VIEW WITH OPTICAL INSTRUMENTS.
Please read thoroughly and comply with the Safety Instructions and
User Manual before using this product. Failure to read and follow may
void the warranty.
WARNING!
ATTENTION:
Read all instructions prior to operating this laser tool. Do not remove
any labels from tool.
• Do not set up laser tool at eye level or operate the tool near a
reflective surface as the laser beam could be projected into your eyes or
into the eyes of others.
• While the product is in operation, be careful not to expose your eyes
to the emitting laser beam (Green/Red light source). Exposure to a laser
beam for an extended time may be hazardous to your eyes.
• Do not attempt to view the laser beam through optical tools such as
telescopes as serious eye injury may result.
• Do not disassemble or modify the laser in any way. Modifying the tool
may result in hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate
the laser. Serious eye injury may result.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 2 seconds. Eyelid reflexes will normally provide adequate
protection.
• The following label/print samples are placed on the product to inform
of the laser class for your convenience and safety.
Summary of Contents for ML3
Page 1: ...ML3 ML3G MANUAL ...
