Made by ALL Engineering
is a trade mark of Roon labs
Connections
Caution!
Please connect your interconnects first before connecting the mains power cable!
•
Power requirements:
Check if the product is made conform the power requirements of your
area. On the back side the product is marked for the specific mains voltage.
•
LAN (local area network) input:
Connect an UTP cable with your local network. The Ambre is
made as a Roon end point and cannot work as a standalone device. The Ambre expects a
working Roon music server on the same local network.
•
Coaxial Output:
A 75 Ohm coaxial cable should be used to connect the Ambre to other digital
audio equipment like a dac for instance. The coaxial output has a galvanic isolation and can
handle a maximum sample rate of 192 kHz.
•
AES/EBU digital output:
When using the AES /EBU digital output a special 110 Ohms XLR
cable should be used to connect the Ambre to other digital audio equipment. The AES/EBU
interface has a galvanic isolation and can handle a maximum sampling rate of 192 kHz.
•
Optical output:
A standard Toslink cable can be used to connect the Ambre to other digital
audio equipment. The max sampling rate of the Toslink interface is limited to 96kHz.
