metrotek Bercut-MMT, Operation Manual

Page: 48 / 85

48 TCP/IP: Basic Testing
Test results are put into information table with sender and recipient IP
addresses, MAC address of a computer that answered to the broadcast request
(is sent to all computers in the network), and response time.
6.5 Ftp/http
This function is used to check connection with a network resource by enter-
ing electronic address, valid for a given network. The
URL field should be
populated with URL of the needed resource
1
. Test result is displayed in two
information blocks: first has node name, its IP address and port (last two dig-
its separated by colon from IP address). Below the first block, the second one
is located, that contains downloaded page format and downloaded amount in
percent, as shown at Figure 6.6.
Figure 6.6. Results of connection using ftp/http
1
Example of input electronic addresses: http://linux.org — for hypertext protocol [5];
ftp://ftp.ru.debian.org — for data transmission protocol [6].
Bercut-MMT: Ethernet Networks Analysis