17
You can access the adjusting options for the TV signal in Menu
/ Setup /
TV Setup.
• On
Aspect Ratio
, select
4:3
or
16:9
depending on your screen format.
• If you have a 4:3 screen, you can choose on
widescreen
the way a 16:9
image will appear on your TV.
- The
CenterCutout
mode increases the image size without
distorting it to fill the whole screen.
- The
FullFrame
mode resizes the image horizontally in a 4:3 screen.
The image is therefore distorted.
- The
Letterbox
mode shows a full image, with black strips at the top
and bottom of the screen.
• On
Standard
, choose between
RGB
and
CVBS
. The CVBS mode
(composite) gives an image of lower quality than the RGB, but is compatible
with all TVs.
IMPORTANT !
If you have a 4:3 screen, do not adjust the
Aspect Ratio
to
16:9
!
Apart from TV channels, terrestrial digital also allows you to receive
radio channels.
As soon as you press the TV/RAD key, you are entering the radio mode.
From then on, the CH+ and CH- keys will allow you to move from one
radio channel to another one. To go back to the TV mode, press the TV/RAD
key once more.
9 - Radios
10 - Channel Search
You should follow this process when you have lost a channel or if new channels
are emitted by operators.
• Go to Menu /
Setup
/
Service Setup
/
xxxx
/
Fullscan Replace Existing
Services
.
The receiver will search for new channels and add them.
8 - Adjusting the TV signal
Summary of Contents for ZAPBOX
Page 2: ......
Page 7: ...7 info metronic com ...
