7
CONNECTION WITH A FIXED SATELLITE DISH ALREADY ALIGNED ON A
SATELLITE
The receiver being disconnected from the mains, connect directly the LNB to the LNB recei-
ver input. Connect a scart lead from the television to the receiver TV output scart socket.
Switch on the television, connect the receiver on the power supply, the green LED switches
on, then flickers with the red LED, then only the red LED remains lit. Press the Standby but-
ton. Check in the list of the pre programmed channels at the end of the user manual. You
can select and watch the channel of this satellite.
CONNECTION ON A DUAL-HEAD SYSTEM ASTRA 19,2° + HOT BIRD ALREADY
ALIGNED
Connect the cables and the leads as indicated on the figure below (figure n°4). It is useful to
know on which inputs of the switch the heads Astra and Hotbird are connected. If you do not
know it and the installation is difficult to reach, test the 2 possible combinations:
Astra on A and HotBird on B or Astra on B and HotBird on A.
To program your receiver, go to page 7, installation of a Bi-head satellite dish Astra 19,2° +
Hot Bird.
Caution: you should not alter the satellite dish adjustments or the switch, it is only
necessary to program your digital receiver.
figure 4
4
5
6
Ntc Accessbox-GB 3/11/03 8:44 Page 8
