14
15
5) Store the Hotbird position
(7)
6) Reset
(3)
the motor to bring it back to the 0° position.
7) Switch off the receiver, take off the cables and then fix
the motor on the wall mount or mast. Tighten the screws
(4) with such a torque that it doesn’t fall down, but to
still allow to turn around the mast.
8) Direct roughly the motor towards the south. In case of
an assembling on a wall, make sure the wall faces south
(+/- 20%).
9) Link the receiver and the motor with the long wire
prepared at the step D.
(3)(7)
Go to corresponding
paragraph page 4 and 5
6
Exemple for London
