.
6
1 - Installation
A - Simplified installation
As the receiver is not yet plugged into the main source, connect the antenna
directly to the ANT input of the receiver. Connect the TV to the TV scart outlet
of the receiver. Switch on the TV and connect the receiver to the main source.
Insert the batteries in the remote.
A red indicator appears on the
receiver. Press the ON/OFF
key of the remote. The green
indicator will light on and the
welcome screen appears on the
screen. If this is not the case, you
should double-check the scart
connections and or force the A/V
or EXT mode of your TV (refer
to the TV manual). Press OK to
start the installation.
The automatic channels lookup
should start. At the end, the first
channel will appear, meaning the
standard installation is done.
At the bottom of the screen, an
estimation of the remaining time
is displayed. Allow one or two
minutes for the receiver gives a
reliable estimation.
If
the
search
has
not found all channels (or none), this probably means that you need
to better the installation (see next paragraph). If no channels
are found after you have done so, this probably means that you area
is not covered by Free To View.
