20
A - Language selection
If you want to change the language of the menus :
• Press MENU.
• Select the fourth menu and the third sub menu (
Installation menu
).
• Press
4
key until the language is appropriate to you.
• Press EXIT.
B - TV scart settings
• In the MENU /
Installation / System installation
, you can adjust the video signal that comes out of
the TV scart.
• On the line
Screen format
, you must select the size of your TV set :
4:3
or
16:9
. Attention, select
16:9 only if you have a widescreen TV. This setting is related to the TV set, not the program you’re
watching.
• On the line
Video Output
, you can choose between
CVBS
or
RGB
. CVBS is universal mode that
works with all TV sets, but RGB gives better picture. If you select RGB, the CVBS output is disabled,
so you can’t use, for example, a video sender on the video cinch (RCA) output.
• On the line
TV type
, leave AUTO. You can, if you want, force the output to
PAL
or
NTSC
if your TV
set has special requirements.
• Press EXIT to exit all the menu.
C - Time settings
• Go to MENU /
Time / Time settings
, you can adjust the video signal that comes out of the TV
scart.
• On the line
Local shift
, select the correct value. In UK, GMT in winter time, and GMT +1 in summer
time.
• On the line
Time
, you can select YES if you want the receiver posts the time on the front panel when
the receiver is in standby. Caution, time is usually updating by analyzing the data sent by channels.
These data being able to be erroneous, we decline any responsibility in the event of inaccuracy of the
hour indicated by the receiver.
This operation resets the memory, including all settings, as the channel list.
Beware, all the modifications you carried out will be lost.
To reset the receiver, do the followings :
• Go to the MENU /
Installation
/
Complete resetting.
• Confirm with OK.
• The receiver ask you the language as the first lighting.
13 - Resetting the receiver
12 - Miscellaneous settings
