MS1633 FocusBT Connection Setup
13)
Power up
the FocusBT scanner and allow it to boot completely. Three beeps will
indicate the scanner is completely booted.
14) To establish a connection with the MS1633 FocusBT scanner click the “
Connections
”
tab and then click the “
Discover
” Button.
15) Select the
FocusBT
scanner from the list and click the
Connect
Button
.
MS1633 Focus BT Scanner Installation Guide
31
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.