1 Introduction
750 Autosampler
8
1.5
Safety notes
1.5.1
Electrical safety
While electrical safety in the handling of the 750 Autosampler is assured
in the context of the specifications IEC 1010-1 (protection class 1, de-
gree of protection IP20), the following points should be noted:
•
Mains connection
Setting the
mains voltage
, checking the
mains fuse
and the
mains
connection
must be effected in accordance with the instructions in
section 2.3.
•
Opening the 750 Autosampler
When the 750 Autosampler is connected to the power supply the
instrument must neither be opened nor should parts be removed from
it, otherwise there is a danger of coming into contact with compo-
nents which are live. Always disconnect the instrument from all voltage
sources before you open it and ensure that the
mains cable is
disconnected from mains connection plug
14
14
!
•
Protection against static charges
Electronic components are sensitive to static charging and can be
destroyed by discharges. Before you touch any of the components
inside the 750 Autosampler, you should earth yourself and any tools
you are using by touching an earthed object (e.g. housing of the
instrument or a radiator) to eliminate any static charges which exist.
1.5.2
General precautionary rules
•
Handling of solvents
Check all tubing of the IC system periodically for possible leaks.
Follow the relevant instructions regarding the handling of flammable
and/or toxic solvents and their disposal.
Summary of Contents for 750 Autosampler
Page 65: ...5 Appendix 750 Autosampler 62...
